What does fault B1B01 – key transponder mean?
This fault is very common on these vehicles and should be left alone.
This fault is very common on these vehicles and should be left alone.
The tool will not point to which parts need replacing but it is the first line of defense when trying to diagnose a problem. Reading ECU’s fault, if the ECU registered some related to the issue, will help in finding the source of the problem. Other features like live values, service routines and others will [...]
Pre 2010 vehicles: Menu->Car Config->Audio Control Bluetooth set to YES Telephone set to DOCK_BT. 2010 onwards: Menu->Car Config->Audio Control Bluetooth set to Bluetooth enabled Bluetooth handsfree telephone set to Bluetooth handsfree telephone system Cellular telephone set to Cellular docking wBluetooth
There is a procedure to reset all COM ports so that they become available. The following webpage explains the procedure for windows XP and 7. http://blog.cognitioninfotech.com/2009/01/how-to-clear-or-reset-com-port.html
The COM port number allocated to the unit must be verified. To verify the port number on windows XP: Control Panel -> system -> Hardware -> Device Manager -> Port Com There should be one named USB Serial port (COM XY), the following picture [...]
In order to make the rear view camera image appear on the navigation screen when reversing, the screen needs to be modified. This will fool the navigation screen to think that it’s in a Range Rover. The following thread from Disco3.co.uk explains the procedure: http://disco3.co.uk/forum/topic74474.html
Yes, it will work on any supported vehicles. Market/country specs do not prevent our products from working.
The IIDTool in itself does not perform any diagnostic or problem detection. It gives access to faults stored in the vehicle's ECUs. Unfortunately, ECU fault detection algorithms cannot detect every problem. The majority of faults relate to external devices (sensors, etc) or wiring issues.
Here’s a quick general explanation into diagnostic tools/systems. There are 6 basic functions for a diagnostic system: Fault (DTC- diagnostic trouble code) reading and clearing Live Value display Editing the car configuration files (CCF) ECU Flashing Executing service routines/manually actuating components (testing function) Initializing, calibrating, or programming new components Starting with the lowest priced units, [...]
A diagnostic system is an interface to read / clear fault of specific ECUs and much more. A system tester is a devices especially built to test all components of a defined system. For example, if you want to test the light signals of a trailer connection, a tester is connected and a test sequence [...]